BMW R 1200 S Rider's Manual page 99

Install mounting screws 2
with appropriate torque.
Brake caliper on slider
tube
22 lb/ft (30 Nm)
Remove adhesive tape from
wheel rim.
Insert mudguard in brack-
et 1.
Install screws on left and
right.
Operate brakes several
times until brake pads
contact brake disk.
Remove a rear wheel stand
if mounted.
Removing rear wheel
Components of the ex-
haust system can be
hot.
Do not touch hot parts of the
exhaust system.
Place motorcycle on an
auxiliary stand; BMW Mo-
torrad recommends BMW
Motorrad rear wheel stand.
Installing rear wheel stand
( 100)
Engage first gear.
Remove the 5 studs 1 from
the rear wheel while sup-
porting the wheel.
Remove lock washer 2 of
rear wheel stand if neces-
sary.
Lower rear wheel to ground.
Roll rear wheel out toward
rear.
7
97
z