BMW R 1200 S Rider's Manual page 97

ABS sensor cable is not
damaged.
Raise front of motorcycle
until front wheel can ro-
tate freely. To lift motorcy-
cle, BMW Motorrad recom-
mends using BMW Motor-
rad front wheel stand.
Mounting front wheel stand
( 99)
Remove axle clamping
screw 5.
Remove quick-release
axle 6 while supporting
wheel.
Roll the front wheel forward
to remove.
with OE Anti-Lock Brake
System (ABS):
When rolling out wheel,
watch ABS sensor on left
side.
Remove spacing bushing 7
on left side from wheel hub.
Installing front wheel
Threaded fasteners not
tightened to the speci-
fied torque can work loose or
their threads can suffer dam-
age.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
During the following
work, parts of the front
brake, in particular of the
BMW Motorrad ABS, can be
damaged.
Take care not to damage the
brake system, in particular the
ABS sensor with cable and
the ABS sensor ring.
The front wheel must be
installed right way round
to rotate in the correct direc-
tion.
Observe the direction of rota-
tion arrows on the tires or on
the rim.
7
95
z