BMW R 1200 S Rider's Manual page 98

7
96
Mount spacing bushing 7
on left side on wheel hub.
Roll front wheel into front
forks.
z
with OE Anti-Lock Brake
System (ABS):
When rolling in wheel,
watch ABS sensor on left
side.
Lift front wheel and install
quick-release axle 6 with
appropriate torque.
Quick-release axle in
axle mount
37 lb/ft (50 Nm)
Tighten axle clamping
screw 5 with appropriate
torque.
Clamping screw for
quick-release axle
14 lb/ft (19 Nm)
Remove front wheel stand.
Ease brake calipers onto
brake disks.
with OE Anti-Lock Brake
System (ABS):
The cable of the ABS
sensor could chafe
through if it comes into
contact with the brake disk.
Ensure installation of the ABS
sensor cable close to the
front suspension.
Route ABS sensor cable 4
as shown in picture.