BMW R 1200 S Rider's Manual page 105

Install cover 2 (low beam) or
cover 3 (high beam).
Replacing parking light
bulb
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Switch off ignition.
To achieve better acces-
sibility, turn the handle-
bars to the left.
Take off cover cap 1.
Disconnect connector 2.
Remove bulb socket 3 by
turning counterclockwise.
Remove bulb 4 from bulb
holder.
Replace defective bulb.
7
103
z