Brother dcp 9020 cdn Quick Setup Manual page 13

Wired Network
c
Choose Wired Network Connection
(Ethernet), and then click Next.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
d
When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
the user's guide for your software for
information on how to add the following
network ports:
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP ports 161 and 137.
e
The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
• If prompted, choose your machine from the list,
and then click Next.
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• If there is more than one of the same model
connected on your network, the IP Address and
Node Name will be displayed to help you
identify the machine.
• You can find your machine's IP address and the
Node Name by printing out the Network
Configuration Report (see Print the Network
Configuration Report uu page 17).
• If the Windows Security screen appears,
select the check box and click Install to
complete the installation correctly.
f
g
11
a
NOTE
• If an error message appears during the
software installation, do one of the following:
®
Firewall, see
• Depending on your security settings when using
the machine or its software, a Windows
Security or antivirus software window may
appear. Please allow or permit the window to
continue.
Windows
When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
When the Setup is Complete screen appears,
make your selection, and then click Next.
Finish and restart
Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
®
- For Windows XP, Windows Vista
®
Windows 7 users: run the Installation
Diagnostics located in
All Programs > Brother > DCP-XXXX LAN
(where DCP-XXXX is your model name).
®
- For Windows 8 users: to run Installation
Diagnostics, double-click the
Utilities) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click Tools in
the left navigation bar.
®
®
and
(Start) >
(Brother
®
13