Appendix - Canon imageRUNNER 2545i Printer Manual

Cause 4 The paper size loaded in the drawer is different from the paper size you have set
up in the application software, or the appropriate paper size you have set for
enlarging or reducing the copy is not loaded.
Remedy 1 Change the paper in the selected drawer to the paper size you have set in the
application software (or to the size you have set for enlarging/reducing copy),
and then print again.
Remedy 2 Select the drawer with the appropriate paper size you have set up in the
application software (or to the size you have set for enlarging/reducing copy),
and then print again.
Cause 5 The paper in the drawer or the stack bypass has run out.
Remedy Load more paper.
The machine does not work.
Cause There is a problem with the machine or software.
Remedy Follow the instructions in the message on the touch panel display.
You cannot print a job or store a job.
Cause The total number of pages in all jobs has exceeded the limit which can be
processed.
Remedy 1 Cancel other jobs, or wait until those jobs are finished, and then print again.
Remedy 2 Divide the job, and then print again.
Paper is excessively curled after coming out of the machine.
Cause You may be using paper that curls too easily.
Remedy 1 Remove the paper stack, turn it over, reload it in the drawer and try again.
Remedy 2 Make sure that the paper meets the paper requirements. (See Chapter 7,
"Appendix," in the Reference Guide.)
High jam rates, incorrect feeding, or multiple sheet feed errors.
Cause You may be using unsuitable paper.
Remedy Always use paper that is suitable for the machine. (See Chapter 7, "Appendix,"
in the Reference Guide.)
Identifying and Isolating Problems
5
5-3