Canon imageRUNNER 2545i Printer Manual page 60

NOTE
• Rotate+Collate and Rotate+Group are available for selection if the paper size is A4,
A4R, B5, B5R, LTR, or LTRR.
• If Rotate+Collate and Rotate+Group is selected, part of the print image may be cut off
when the image is rotated. You need to load the same size paper as the original in the
paper drawers in both landscape and portrait positions. If you do not, all the sheets will
be printed in the orientation that the loaded paper is in.
• Offset+Collate and Offset+Group are available for the following paper sizes:
A4, A4R, A3, B4, B5, LTR, LTRR, LGL, or 11" × 17".
• When you select Staple, you can select the stapling position.
• The Staple+Collate mode is available for selection if the paper size is A4, A4R, A3, B4,
B5, LTR, LTRR, LGL, or 11" × 17".
• You can use the 64 to 128 g/m
that can be stapled when you are using the 80 g/m
- A4, B5, and LTR: 50 sheets
- A4R, A3, B4, LTRR, LGL, and 11" × 17": 30 sheets
• When you are stapling paper in landscape orientation, the image orientation and the
staple position may not match, as shown below.
[Corner (Upper-L)]
[Corner (Lower-L)]
[Double (Left)]
[Double (Top)]
2
paper for stapling. The maximum number of sheets
2
paper is as follows:
[Corner (Upper-R)]
[Corner (Lower-R)]
[Double (Right)]
[Double (Bottom)]
4-17
Settings Menu
4