Ps Settings; Job Timeout; Wait Timeout; Print Ps Errors - Canon imageRUNNER 2545i Printer Manual

PS Settings

The PS settings available with the machine are described below.
NOTE
To use the PS printer function with the machine, the function must be activated with
the optional PS Printer Kit.

Job Timeout

4
0 to 3600 seconds (in increments of 1); 0s
This setting enables you to specify the amount of time before a job times out. If a job has not
finished within the set time limit, the job automatically cancels.

Wait Timeout

0 to 3600 seconds (in increments of 1); 300s
This setting enables you to specify the amount of time the machine will wait for data sent
from the host computer before it times out. If data is not received within the set time limit, the
job automatically cancels.

Print PS Errors

Off, On
This setting determines whether an error page is printed when an error occurs.
4-28

PS Settings