Table of Contents
Advertisement
26
en | Troubleshooting
The unit does
not report an
alarm.
The unit is not
operational after
a firmware
upload.
Web browser
contains empty
fields.
2016.08 | v1.0 | AM18-Q0707
Alarm source is not
selected.
No alarm response
specified.
Power failure during
programming by
firmware file.
Incorrect firmware
file.
Active proxy server in
network.
FLEXIDOME IP
panoramic 6000/7000 IC
Select possible alarm
sources on the Alarm
sources configuration
page.
Specify the desired
alarm response on
the Alarm
connections
configuration page; if
necessary change the
IP address.
Have the unit
checked by Customer
Service and replace if
necessary.
Enter the IP address
of the unit followed
by /main.htmin your
Web browser and
repeat the upload.
Create a rule in the
local computer's
proxy settings to
exclude local IP
addresses.
Bosch Security Systems
Advertisement
Table of Contents
