Canon WUX6000 User Manual page 184

Completing Computer Settings
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to "Network Setting" (P179).
Item
Mail authentication
User name
Password
Confirm password
POP3 server IP address
POP3 server port number
POP before SMTP response
time
Downloaded from ProjectorsManual.com Manuals
Explanation
Select the mail authentication
method. If OFF is selected,
the other mail authentication
settings cannot be changed.
Enter the user name to use for
mail authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Enter the password for mail
authentication in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
For confirmation, enter the
same password as you
entered in [Password].
Enter the POP3 server IP
address in 1-byte numbers.
Enter the POP3 server port
number in 1-byte numbers (1 -
65535).
Enter the SMTP authentication
timeout period after POP3
authentication (units:
milliseconds) using 1-byte
numbers (0 - 9999
milliseconds).
184
Factory default setting
OFF
<Blank>
<Blank>
<Blank>
0.0.0.0
110
300