Canon WUX6000 User Manual page 155

Here, you can use the following settings in the edge blending menu.
Off
Adjust
Side
Color
blending
adjustment
Black level
adjustment
Marker
Reset
• If you have already completed edge blending settings, selecting [Adjust] will apply
them.
• To restore the default settings before adjustment, select [Reset].
3
Set [Marker] to [On].
Marker lines are projected on the images. The red marker indicates the start
position for adjustment, and the green marker, the end position.
By default, the green and red markers are displayed in the same position, so only the red
marker is visible.
4
Select the position where the images overlap.
When you are adjusting the left image, this area is along the right edge of the
image. In the edge blending window, select [Side] > [Right].
Left image
Overlapping area
Downloaded from ProjectorsManual.com Manuals
Do not blend overlapping areas.
Display the menu for blending overlapping areas.
Left, Width Specify the width between the start and end
Right, markers.
Top,
Start Moves the start position marker.
Bottom
position
Off Do not adjust colors of blended images.
Adjust Adjust the color of overlapping area. (P157)
Off Do not adjust the black level.
Adjust Adjust the black level of non-overlapping image
areas. (P158)
Off Hide the markers.
On Display markers showing the adjustable blending
area, with a red line at the beginning and a green
line at the end.
Reset the marker settings.
Right image
155
Installation-Related Menu Settings