Replacing The Lamp - Canon WUX6000 User Manual

Replacing the Lamp

When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
• Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When you press the POWER button, "Push POWER button again to turn off
power." message appears.
• After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• This message will not be displayed again if you select [No] in response to the
message "Do you want to display this message again?".
3,000 hours or more
If a lamp replacement message is displayed, refer to "Replacing the Lamp" (P199,
P200).
• Only the POWER button is available while this screen is displayed.
• When you press the POWER button, the "Push POWER button again to turn off
power." message appears.
• When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
• You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu. (P108)
• This screen is not displayed when [Lamp warning display] is set to [Off]. (P151)
Downloaded from ProjectorsManual.com Manuals
197