Special Markers - Teltonika TWCT22 User Manual

8.4.3.1

Special Markers

1. TWCT22 can send SMS message with additional information about IO values.
To get the values of input/output via SMS. You need to create new Message Action and in the text box
enter one of the special markers: Special markers shown below:
a) @A1 - „analog input 1". Answer will be from 0 to 99 with movable point;
b) @A2 - „analog input 2". Answer will be from 0 to 99 with movable point.;
c) @D1 - „Digital input 1", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
d) @D2 - „Digital input 2", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
e) @D3 - „Digital input 3", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
f) @D4 - „Digital input 4", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
g) @R1 - „Digital relay output 1", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
h) @R2 - „Digital relay output 2", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
i) @R3 - „Digital relay output 3", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
j) @R4 - „Digital relay output 4", Answer will be symbol 0 or 1 (0 – OFF, 1 - ON);
k) @PW - „Mains power voltage", 0 – 99 with movable point.
l) @SF – „Device fault status flag":
i. ok – device work good.
ii. err – device status fault.
m) @YY – year, SMS message creation year from 0000 to 9999;
n) @MM – month, SMS message creation month from 00 to 99;
o) @DD – day, SMS message creation day from 00 to 99;
p) @HH – hour, SMS message creation hour from 00 to 99;
q) @NN – minute, SMS message creation minute from 00 to 99;
r) @SS – second, SMS message creation second from 00 to 99.
Example:
@A1 V, @R1, @D2, @R2, @PW V, @YY.@MM.@DD
Answer:
7,4 V, 1, 0, 0, 17 V, 2009.11.09
2. Also there is a possibility to change TWCT22 e-mail subject by writing in the Action Message in
message field on the first string text:
Subject: xxxxxx – there "xxxxxx" is the preferred subject text in e-mail.
Received e-mail will be with subject xxxxxx.
22