Digital Event - Teltonika TWCT22 User Manual

Picture 8.4.2
- If you want to delete any analog event, mark event's checkbox and press DELETE.

8.4.2 Digital Event

- Press button
and configure parameters.
← The name of events does not have any role in
execution of the event. It's just used as identification,
so you are free to give any name. You are able to use
text, numbers, special characters.
← Select the digital type from the list: Analog UP,
Analog DOWN, Analog HIGH, Analog LOW.
← Choose digital input number (1 or 2) .
← The time interval after which the event will be sent
to the logic function if the event condition s still exist.
Noise cancellation. When TYPE is Analog HIHG or
Analog DOWN it is not necessary to fill SETUP TIME.
← The time interval after which the event will be sent
back for next operation.
← Select the level of the triger: 0 – 10 V or 0 – 20
mA.
← Select the level of the triger: 0 – 20 mA.
← To the effect that all configurations would be
performed, press button SUBMIT.
. Then you will see the new item "no name" (picture 8.4.3). Click it
19