Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Teltonika TBox20
Summary of Contents for Teltonika TBox20
- Page 1 ALARM MONITORING & CONTROL SYSTEM TBox20 USER’S MANUAL...
- Page 2 Copyright © 2008 UAB „Teltonika“. Disclaimer: The use of Alarm Monitoring and Control System TBox20 is at sole discretion of the user. Teltonika cannot be held responsible for any damages arising due to use of Alarm Monitoring and...
-
Page 3: Table Of Contents
TBox20 user‘s manual CONTENT INTRODUCTION ........................4 TECHNICAL SPECIFICATION ....................4 MECHANICAL INTEGRATION ....................4 3.1. PACKAGE CONTENTS ....................4 3.2. DIMENSIONS ........................4 3.3. FRONT PANEL ........................5 CONNECTORS PIN_OUT......................6 4.1. CONNECTORS FRONT UP PIN-OUT ................6 4.2. -
Page 4: Introduction
NOT be placed in metal case. The supplied antenna usually has 2,5 meters length cable, so if you plan to mount TBox20 into a metal case, please mount the antenna outside the metal case. If cable length of 2,5 meters is not enough, contact our sales... -
Page 5: Front Panel
Serial port connector 4 relay outputs state LED Picture 3.3.1 PWR – Power LED turns on when power is applied to Tbox20. It also shows the device’s working status: • LED ON; • LED blink low (0.2s ON, 0.6s OFF) – the device is registered in GSM network;... -
Page 6: Connectors Pin_Out
TBox20 user‘s manual 4. CONNECTORS PIN_OUT 4.1. CONNECTORS FRONT UP PIN-OUT Picture 4.1.1 Pin name Description AIN 1 - Analog input 1. Input voltage range is from 0 to 10V (max 15V) or input current AIN 1 + range is 0-20mA (max 30mA). -
Page 7: Sample Electrical Connection
TBox20 user‘s manual ROUT 3 NO Relay 3 normally open output. Max load ~250V, 7A. ROUT 3 CO Relay 3 common output. ROUT 3 NC Relay 3 normally closed output. ROUT 4 NO Relay 4 normally open output. Max load ~250V, 7A. -
Page 8: Instalation And Starting
TBox20 user‘s manual Picture 4.4.1. Sample scheme 5. INSTALATION AND STARTING 5.1. INSTALLING A SIM CARD • Remove the cover with screwdriver (see the picture 5.1.1). • Slide the SIM card holder toward its hinge to unlock it (see the picture 5.1.2). -
Page 9: Dip Switch Settings
Internet explorer window will run automatically. There you will see Tbox20 application. 5.3.7. You can find possible port to which is connected TBox20 device by pressing the button Autodetect. After you need to select detected COM port with record Box. -
Page 10: Data Configuration
If “..” with COM port number, then the port is busy. Maybe it is opened by another program. 6. DATA CONFIGURATION Data configuration is executed by the internal WEB server application. You need to connect Tbox20 to PC and the server program should be run (see section 5.3). 6.1. APPLICATION‘S LOGICAL ELEMENT System log Events... -
Page 11: Functions
TBox20 user‘s manual 6.2. FUNCTIONS TBox20 is a monitoring and control device for remote objects. Remote commands are described by three definitions: logic (the relationship between elements), event (an occurrence detected by the device) and action (a state or process that is controlled by the device). Events are following occurrences: four digital inputs, two analog inputs, two types of receiving messages (SMS, call). -
Page 12: Events
Picture 6.3.3 6.4. EVENTS One of the main function elements of Tbox20 is to alert you whenever digital/analog inputs to the Tbox20 cross their predefined value. Events define conditions of the digital inputs (DIN), analog inputs (AIN), received messages and errors. - Page 13 TBox20 user‘s manual Digital input DIN Logics Events Actions Users Settings Status System Log Tests Edit EVENT – Fire sensor NAME Fire sensor TYPE Digital UP ▼ 1 ▼ SETUP TIME (ticks) APPLY SUBMIT RESET Picture 6.4.2 When you are setting up events for digital inputs, you would need to configure the following...
-
Page 14: Actions
TBox20 user‘s manual 1 ▼ SETUP TIME (ticks) THRESHOLD (V) 2,098 APPLY SUBMIT RESET Picture 6.4.4 When you are setting up events for analog inputs, you would need to configure the following parameters: Parameter Description Values Event name It’s the name of event and does not Text, numbers, special have any effect on operation of event. - Page 15 TBox20 user‘s manual Tests List of ACTIONSs Name Type □ To turn on the siren ROUT ON □ SMS fire Short message □ CALL fire Phone call DELETE NEW ROUT action NEW message Picture 6.5.1 If you want to add action, click on New ROUT action (or New message) button. Then you will see the new item “no name”.
-
Page 16: Users
Picture 6.5.5 6.6. USERS User is authorized person which is allowed to use the device TBox20. The users entered here would have the privileges to receive alarm alerts or control the actions of TBox20 through SMS or Phone calls. -
Page 17: Settings
You need to fill in this information to send email. SMTP server address is given by GSM network provider. Enter the Tbox20 email name to identify the e-mail’s sender in the Sender Address field. Logics Events Actions Users Settings Status System Log... -
Page 18: Test
Changing of PIN or PIN forbid is possible in the PIN item. If it is necessary to protect SIM card in the TBox20 by PIN number, to area SIM PIN it is written PIN number and it is confirmed by button Store PIN. -
Page 19: Status
(information are by a single application find out on power up TBox20). In bottom of window hereof windows it is GPRS Connection Log, where there are information about make up GPRS connection and pertinent problems on this formation. -
Page 20: Support
TBox20 user‘s manual 7. SUPPORT Before contacting for support, make sure that you went through the above manual thoroughly. If you are still facing problems, feel free to contact our technical support team at support@teltonika.lt we would be glad to help you.
Need help?
Do you have a question about the TBox20 and is the answer not in the manual?
Questions and answers