Troubleshooting - Dish Network WALLY User Manual

Troubleshooting:

75% of all technical problems that an agent can help you
with can be solved by following these five easy steps:
1.
Make sure your DISH remote is in SAT mode.
2. Make sure your TV is on the correct input.
3. Make sure you're on the correct Favorites List.
4.
Check for anything obstructing the signal to
your satellite dish, such as tree branches, severe rain,
or snow build-up. If it is safe to do so, remove the
obstruction or wait for it to pass.
5.
Reset your receiver by unplugging it from the wall for
10 seconds. Plug it back in and turn it back on.
Wally
_______________
ROOM
Other
_______________
ROOM
Other
_______________
ROOM
INPUT/CHANNEL
INPUT/CHANNEL
INPUT/CHANNEL
9/2/2015 4:16:19 PM