Table of Contents
Advertisement
Quick Start Guide of Network Video Recorder
camera.
Upgrade the connected IP camera.
One-touch RAID Configuration
Purpose:
To improve the data security, the RAID function can be enabled and then the disk array must be configured if you
want to save recording and log files locally. Through one-touch configuration, you can quickly create the disk
array. By default, the array type to be created is RAID 5.
Before you start:
As the default array type is RAID 5, at least 3 HDDs must be installed in you device.
Steps:
1. Enable the RAID function by checking the checkbox in the disk mode configuration interface.
Menu > HDD > Advanced
2. Enter the Physical Disk Settings interface.
Menu > HDD > RAID
3. Click One-touch Configuration to enter the One-touch Array Configuration interface.
4. Edit the array name in the Array Name text filed and click OK button to start configuring array.
If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It is
recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal.
5. When the array configuration is completed, click OK button in the pop-up message box to finish the settings.
Show the security status of the camera
Security
to be active/inactive or the password
strength (strong/medium/weak/risk)
24
Hide quick links:
Advertisement
Table of Contents
