Hyundai HLB 1510 Instruction Manual page 40

Band
▪ By pressing / select Band.
▪ By pressing / button, you can change the
channel type to C or S.
Channel
▪ By pressing / select Channel.
▪ Use / buttons to change the channel number. You
can also enter a number via digit buttons on the remo-
te control.
Standard
▪ By pressing / select Standart.
▪ Use / button to change the standard to B/G, D/K,
I or L/L1.
Colour System
▪ By pressing / select Colour System.
▪ Use / button to change the colour system to PAL,
SECAM or AUTO.
Search
▪ By pressing / select Search.
▪ Press / button to start search. The search will stop
when a signal is found.
Note: If you press the buttons with one-step moves,
a frequency of 0.25 Mhz will be advanced.However if
you press the buttons all at once,it will advance auto-
matically. To stop searching at a certain time, you may
press / buttons.
VCR Mode
▪ By pressing / select VCR mode.
▪ Use / buttons to set VCR Mode on or off.
Hint: If you want to watch a DVD , then you have to set
this item as „off".
Decoder
You can use this mode to connect any decoder to your
TV.
▪ By pressing / select Decoder
▪ Press the / buttons to turn it ON or OFF.
When you switch the Decoder setting to OFF, EXT1
output will be muted. In this case, EXT1 output will not
be available to display video. If it is switched ON, the
EXT-1 output will be the selected video source. Any
decoder can be connected to EXT1 to unscramble re-
quired video signal.
Hint: Decoder setting should be stored separately for
each programme.
Store
By pressing / button select Store.
Press or „OK" button to store the adjustments.
„Stored" will be displayed on the screen.
A.P.S.
▪ By pressing /
▪ Press button to enter the A.P.S. menu. A.P.S. menu
appears on the screen.
A.P.S. (Auto Programming System) Country
Press / button to select your country. If you want to
exit from A.P.S. function, press the „TV" button. For
going back, press
When you press OK button for starting APS, all stored
programs will be erased and the following screen will
be displayed.
Whenever you press the „TV" button, A.P.S. function
stops and Channel table appears on the screen.
ENG - 9
button select A.P.S.
.