Before Switching On Your Tv - Hyundai HLB 1510 Instruction Manual

7. Lightning
In case of storm and lightning or when going on holi-
day, disconnect the power cord from the wall outlet.
8. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts which
are specified by the manufacturer or have the same
specifications as the original one. Unauthorised sub-
stitutions may result in fire, electrical shock, or other
hazards.
9. Servicing
Please refer all servicing to qualified personnel. Do
not remove the cover yourself as this may result in an
electric shock.
Instructions for waste disposal:
▪ Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
▪ Battery, including those which is heavy metal-free,
should not be disposed of with household waste. Ple-
ase dispose of used battery in an environmentally
sound manner. Find out about the legal regulations
which apply in your area.
▪ Cold cathode fluoresant lamp in LCD PANEL con-
tains a small amount of mercury, please follow local
ordinates or regulations for disposal.
„The mains plug of the power supply is used as
disconnect device and therefore shall remain rea-
dily operable."
Warning: To prevent injury, this device must be secu-
rely attached to the floor/wall in accordance with the
installation instructions.
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground terminal provided
at the power outlet using the enclosed power cord. If the provided plug does not
fit your outlet, consult an electrician for replacement of the obsolete outlet.
„The LCD panel is very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue,
green or red. Please note that this does not affect the
performance of your product."
„DO NOT LEAVE YOURTVATSTAND-BYOROPER-
-ATING WHEN YOU LEAVE YOUR HOUSE"

Before Switching On Your TV

Power Connection
IMPORTANT: The TV set is designed to operate on
100-240VAC. For this, an adaptor is used which gives
12V DC voltage.
Connections To The Aerial Input Socket
▪ Connect the aerial or cable TV plug to the Aerial in-
put socket located at the rear of the TV and connect
the cable plug coming out from the TV out socket lo-
cated on the devices (VCR, DVB etc.) to this socket
as well.
Inserting Batteries In The Remote Control Hand-
set
WARNING: Remote control is battery included. A
plastic protector is used to disconnect the batteries in
order to prevent the battery life from reducing. Please
remove the plastic protector before the first use.
ENG - 4
ENG
Surely connect the
ground wire.