Table of Contents
Advertisement
–
Send Dtmf: Sends DTMF (Dual Tone Multi-
Frequency) tones to the contacts you have
selected. These DTMF tones are sent as a
group. The DTMF tones are the tones used
in phones for tone dialing, sounding when
you press the number keys. This option is
helpful for entering a password or an
account number when you call an
automated system, like a banking service.
• End Call: End the active call.
3. If you are in a multiparty call, the
following options also display:
• Swap: Places the active call on hold and
then re-activates the call on hold.
• Join: Joins two calls (both active and on
hold) into a multi-party call.
• End: End the Active Call, Held Call, or All
Calls.
4. When you are finished with your call,
press
to end the call.
Using the Speakerphone During an
Active Call
While in an active call, it is possible to enable
the speakerphone feature.
1. Dial the number and press
2. Press
to activate the
speakerphone. To turn the
speakerphone off, press
3. Press the Up or Down select key to
adjust the volume.
Important! For more information about
Responsible Listening, see "Health
and Safety Information" on
page 109.
Switching Off the Microphone (Mute)
You can temporarily switch your phone's
microphone off, so that the other person
cannot hear you.
Example: You want to say something to a
person in the room, but do not want
the person on the phone to hear you.
.
again
Call Functions
29
Advertisement
Table of Contents
