Table of Contents
Advertisement
Before a new model phone is available for
sale to the public, it must be tested and
certified to the FCC that it does not exceed the
SAR limit established by the FCC. Tests for
each model phone are performed in positions
and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body-worn
operation, this phone has been tested and
meets FCC RF exposure guidelines when used
with an accessory that contains no metal and
that positions the mobile device a minimum of
1.5 cm from the body.
Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment
Authorization for this mobile device with all
reported SAR levels evaluated as in
compliance with the FCC RF exposure
guidelines. This mobile phone has an FCC ID
number: A3LSGHS275G [Model Number:
SGH-A207] and the specific SAR levels for
this mobile phone can be found at the
following FCC website: http://www.fcc.gov/oet/
ea/.
The SAR information for this device can also
be found on Samsung's website:
http://www.samsung.com/sar.
SAR information on this and other model
phones can be accessed online on the FCC's
website through http://transition.fcc.gov/oet/
rfsafety/sar.html. To find information that
pertains to a particular model phone, this site
uses the phone FCC ID number which is
usually printed somewhere on the case of the
phone. Sometimes it may be necessary to
remove the battery pack to find the number.
Once you have the FCC ID number for a
particular phone, follow the instructions on
the website and it should provide values for
typical or maximum SAR for a particular
phone. Additional SAR information can also be
obtained at
http://www.fcc.gov/encyclopedia/specific-
absorption-rate-sar-cellular-telephones.
FCC Part 15 Information to
User
Pursuant to part 15.21 of the FCC Rules, you
are cautioned that changes or modifications
not expressly approved by Samsung could
void your authority to operate the device.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
Health and Safety Information
115
Advertisement
Table of Contents
