Table of Contents
Advertisement
The profile parameters are:
• Set Name: The profile name.
• Access Name: The access point name.
• Auth Type: The type of authentication used
for this WAP connection: None, Normal, or
Secure.
• User ID: The User ID required to connect to
the network.
• Password: The user password required to
connect to the network.
• Protocol: The connection protocol used by
the WAP browser: WAP or HTTP.
• Home URL: The URL address of the page to
use as your home page.
• Gateway Address (WAP only): The gateway
address of the proxy server.
• Proxy Address (HTTP only): The proxy server
address and port.
• Secure connection (WAP only): Determines
if the connection will follow a secure protocol.
• Linger Time (Sec.): A time period (in
seconds) after which the network is
disconnected if there has been no new data
traffic in that time.
• Advanced: Fields used to configure some of
the IP-specific information.
–
Static IP: Specify if you want to manually
enter an IP address. Remove the check mark
if you want the server to automatically assign
the IP address.
–
Local Phone IP: The IP address obtained
from the network operator, if you checked
the Static IP option.
–
Static DNS: Indicates whether to manually
enter the Domain Name Server (DNS)
address. Remove the check mark if you want
the server to automatically assign the IP
address.
–
Server 1/Server 2: The Domain Name
Server (DNS) addresses.
–
Traffic Class: The traffic class. Choices are:
Subscribed, Conversation, Streaming,
Interactive, or Background.
4. Press OK to exit Advanced Settings.
5. Press Save to save the profile settings.
Note: The WAP settings may vary depending on
the service provider.
Web
61
Advertisement
Table of Contents
