Table of Contents
Advertisement
Note: For connection to an electrical supply not
located in the U.S., you must use an
adaptor of the proper configuration for
the power outlet. Using the wrong
adaptor could damage your phone and
void your warranty.
Important! Verify that the phone's battery is
installed prior to connection. If the
battery is not properly installed and
the wall charger is connected, the
phone may power off and on
continuously, preventing proper
operation.
1. Remove the protective cover from the
port on the side of the phone.
2. Plug the connector of the Travel
Charger into the charging port.
3. Plug the adaptor into a standard AC wall
outlet.
4. When charging is finished, unplug the
adaptor from the power outlet.
5. Remove the adaptor from the charger
port.
8
Incorrect
Note: You must unplug the adaptor before
removing the battery from the phone
during charging to avoid damage.
Note: When the Travel Charger is plugged in,
the charging indicator may not appear
for a few minutes, however the battery is
charging properly.
Correct
Advertisement
Table of Contents
