Brother HL-3075CW Quick Setup Manual page 41

Other Information
e
Reinstall the belt unit back in the printer.
f
Reinstall the original packing material into the
printer.
g
Close the top cover.
h
Put the waste toner box in the Styrofoam piece.
i
Using two people, place the printer into the
plastic bag.
j
Put the printer and the Styrofoam pieces into
the carton. Match the front side of the printer to
the "FRONT" mark on the Styrofoam pieces.
Put the Styrofoam piece for the drum unit and
toner cartridge assemblies on the top of the
printer.
k
Put the power cord, drum unit and toner
cartridge assemblies into the Styrofoam piece
as shown in the illustration.
l
Put the two carton trays on the top.
m
Close the carton and tape it shut.
41