Brother HL-3075CW Quick Setup Manual page 21

For Wireless Network Users
9
Choose your wireless setup method
The following instructions will offer two methods for setting up your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
Note
To setup your machine in any other wireless environment, you can find instructions in the Network User's
Guide.
a
Configuration using the Installation CD-ROM and temporarily using a USB cable
It is recommended that you use a PC wirelessly connected to your network for this method.
IMPORTANT
• You need to temporarily use a USB cable during configuration (cable not included).
• If you are using Macintosh, Windows
access point/router by network cable, you need to know your wireless settings. Please write
down your wireless network settings in the area below.
Item
SSID (Network Name)
Network Key (Security Key/Encryption Key)
*The Network Key may also be described as the Password, Security Key or Encryption Key.
IMPORTANT
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Note
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• How can I find this information (SSID and Network Key)?
1. You should see the documentation provided with your wireless access point/router.
2. The initial network name could be the manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
Now go to
For Windows
For Macintosh Users go to page 25
®
XP, or currently using a computer connected to an
Record the current wireless network settings
®
Users go to page 23
21