Brother HL-3075CW Quick Setup Manual page 11

USB
For USB Interface Cable Users
Connect the printer to
8
your Macintosh and
install the driver
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
marked with a
the cable to your Macintosh.
IMPORTANT
• Make sure there are no USB Flash memory
drive inserted.
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.
c
Make sure the printer power switch is on.
symbol, and then connect
d
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
e
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
Please see the User's Guide on the CD-ROM to
install the PS driver (Brother's BR-Script Driver).
f
Choose Local Connection, and then click
Next. Follow the on-screen instructions.
Note
It may take a few minutes for installation to
complete.
Macintosh
11