Brother HL-3075CW Quick Setup Manual page 36

Other Information
HOT SURFACE
• After you have just used the product, some internal parts will be extremely hot. To prevent injury, DO
NOT touch the shaded parts shown in the illustration, when you open the top or back cover (back
output tray).
Inside the product
• DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed
and can pinch or entrap your hand.
IMPORTANT
DO NOT remove or damage the caution labels located on or in the product.
Note
Lightning and power surges can damage this product. We recommend that you use a quality surge protection device on
the AC power line and any Ethernet (RJ-45) cable plugged into the product.
36
(Top View)
Inside the product
(Back View)