Brother HL-3075CW Quick Setup Manual page 25

Wireless Network
Configuration using the Installation CD-ROM and temporarily using a USB cable
(For Macintosh Users)
10
Configure the wireless
settings
IMPORTANT
You need to temporarily use a USB cable
during configuration (cable not included).
a
Turn on your Macintosh. Put the installation
CD-ROM into your CD-ROM drive.
b
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
c
Choose Wireless Network Connection and
then click Next.
d
Choose Temporarily use a USB cable
(Recommended) and then click Next.
e
Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
f
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
g
The wizard will search for wireless networks
available from your machine. Choose the SSID
that you wrote down for your network in step 9
on page 21, and then click Next.
Macintosh
25