Table of Contents
Advertisement
Chapter 3 - Operations
Electrical Device Compliance Notices
Safety Warnings and Cautions
For your safety and the proper operation of the device:
This unit must be installed and serviced by suitably qualified personnel only.
•
Disconnect all power before servicing the unit.
•
•
Do not expose this device to rain or other moisture. Clean only with a dry cloth.
If not installed in an equipment rack, install the product securely on a stable surface.
•
Install the product in a protected location where no on can step or trip over the supply cord, and where the supply
•
cord will not be damaged.
If a system is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack
•
environment may be greater than the room ambient temperature.
Consideration should be given to installing the unit in an environment compatible with the maximum recommended
•
ambient temperature of 50 degrees Celcius (122 degrees Fahrenheit).
•
Install the unit in a rack so that the amount of airflow required for safe operation is not compromised.
The recommended clearance on the top and sides of the unit is at least ½ " (one half inch/one centimeter).
♦
Mounting of the unit in a rack should be such that no hazardous condition is achieved due to uneven mechanical
•
loading.
Use only a grounded electrical outlet when connecting the unit to a power source.
•
Reliable earth grounding of rack-mount equipment should be maintained.
•
Particular attention should be given to supply connection other than direct connections to the branch circuit
♦
(e.g., use of power strips).
Lithium Battery Safety Statement
5
Chapter 3 - Operations
Hide quick links:
Advertisement
Table of Contents
