Kyocera Mita KM-1510 Instruction Handbook Manual page 32

CHAPTER 6 COPIER DEFAULT SETTING
Default code
F11 Lower drawer paper size
(optional)
F12 Turning multi-bypass non-
standard size paper setting ON/
OFF
F13 Non-standard size paper width
setting for multi-bypass
F14 Copy limit
F15 DF auto start
F16 Layout (4 in 1)
6-3
Setting item
Sets the size of paper loaded in the lower drawer.
* This setting item will not be displayed if the optional
drawer is not installed.
Set to "ON" when using non-standard size paper with
the multi-bypass.
Sets the paper width for the multi-bypass to use non
standard size paper.
* The maximum paper length is 14"/355.6 mm.
* This setting item will not be displayed if "OFF" is
selected in "Turning multi-bypass non-standard size
paper setting ON/OFF".
Limits the number of copies that can be made at a time.
Set to "OFF" when not wanting copies to be made
automatically when an original is placed in the DF.
* This setting item is not displayed on the 18 ppm copier.
When using the 4 in 1 layout copying function (see page
5-1), the page arrangement can be selected.
1 Originals of landscape orientation
2 Originals of portrait orientation
* With the 15 ppm copier, this setting item will not be
displayed if the optional memory copy board is not
installed.
Setting contents
Original insertion direction
Original insertion direction
Setting code
(Inch)
1: 8 1/2" x 14"
2: 8 1/2" x 11"
3: 5 1/2" x 8 1/2"
(Metric)
1: A4
2: A5
3: Folio
1: ON
2: OFF*
(Inch)
4.13" to 8.50" (4.13" *)
(Metric)
105 to 216 mm (105 mm*)
* The maximum width of the
print area is 210 mm, with
respect to the paper
centerline.
1 to 99 copies (99 copies*)
1: ON*
2: OFF
1: Landscape
2: Portrait*