Kyocera Mita KM-1510 Instruction Handbook Manual page 35

Default code Setting item
F27 Paper feed shifting adjustment
(lower drawer)
F28 Paper feed shifting adjustment
(multi-bypass)
F29 Inch/metric specifications setting
F30 Folio length setting (drawer)
F31 Folio length setting (bypass)
Setting contents
Adjusts displacement of the copy image.
* This setting item will not be displayed if the optional
drawer is not installed.
Adjusts displacement of the copy image.
* Be sure to use 8 1/2" x 11" (letter)/A4 paper.
Switches the copier specifications setting between inch
and metric.
* Since the specifications setting is made at the factory,
it is not necessary to make this setting under normal
circumstances.
* If "A" and "011" alternate on the copy quantity display,
the copier initializes the data to remedy an error. If this
occurs, make the specifications setting.
When folio is selected as the paper size, this sets the
length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
When folio is used, this sets the length of folio.
* This setting item is available only when metric is
selected for the copier specifications.
CHAPTER 6 COPIER DEFAULT SETTING
Setting code
-3.0 to 3.0 (0*) in increments
of 0.1
-3.0 to 3.0 (0*) in increments
of 0.1
1: Inch
2: Metric
3: Metric (Japan)
1: 210 mm*
2: 216 mm
200 to 216 mm (210 mm*)
6-6