Kyocera Mita KM-1510 Instruction Handbook Manual page 43

WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
3 Holding the green handles, lower the two fixing section
release levers.
4 Remove the misfed paper while taking care not to tear it.
If the paper is not easy to remove, proceed to the next step.
If the paper is removed successfully, proceed to step 9.
* If the paper should be torn, remove all the scraps from the
inside the copier.
CHAPTER 7 WHEN A PROBLEM OCCURS
IMPORTANT
The drum 1 is highly sensitive to light and dirt. Be careful not to
expose it to strong light such as room lighting or to touch the drum
with the hands.
1
5 Holding the green handle, open the ejection guide.
CAUTION
The copier's fixing unit is extremely hot. Take sufficient
care when working in this area, as there is a danger of
getting burned.
6 Remove the misfed paper while taking care not to tear it.
7-6