Sabo 72-12 HF Operator's Manual page 53

UNPACKING AND ASSEMBLY
8
1 2
3
Insert this frame into the canvas cover, ensuring that
it is correctly positioned along the base perimeter.
Hook all the plastic profiles to the frame tubes with
the help of a screwdriver (7).
Insert the handle (8) into the holes of the canvas (9).
Attach this to the frame using the screws (10), fol-
lowing the indicated sequence, and complete the
assembly screwing the four front and rear self-
threading screws (11).
Lastly, fit the stiffening bar
(12) on the outside of the
frame base, keeping the flat
part towards the canvas
and using the nuts and
screws supplied (13) in the
sequence indicated.
10 9 8
1
4
R
3 2
3 (x 2)
11
12
6 (x 4) 10 (x 2)
10
6
6
5
4 - 5
L
2
6
13 13 12
11 (x 4) 13 (x 2)
11
EN
7