Specifications - Makita GN900 Instruction Manual

Cordless clipped head framing nailer
Hide thumbs Also See for GN900:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH (Original instructions)
2-1. Button
3-1. Metering valve
3-2. Cap
7-1. Jet nozzle

SPECIFICATIONS

Nail length X Shank diameter
Nail collation angle (degree)
Figure of nail head
Dimensions (L X H X W)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Container under pressure, keep away
from temperatures over 50℃ (for ex.
sun radiation) Keep container in a well
ventilated place.
Use only outside or well ventilated
rooms. Do not breathe gas.
Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive
mixture.
Do not damage, puncture or burn even
after use.
Wear safety glasses.
Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
Do not use on scaffoldings, ladders.
Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
Explanation of general view
10-1. Screws
11-1. Hook
15-1. Pusher button
17-1. Trigger
Model
Nail capacity
Net weight
Rated voltage
Nail L :50 mm - 90 mm
END107-5
Cd
Ni-MH
Li-ion
vapour-air
Intended use
The tool is intended for the preliminary interior work such
as fixing floor joists or common rafters and framing work
in 2 "x 4" housing.
Noise
The typical A-weighted noise level determined according
to EN792:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
4
18-1. Screws
20-1. Filter cover
20-2. Filter
GN900
d : 2.9 mm - 3.3 mm
40 nails (1strip)
34
Clipped
321 mm X 108 mm X 368 mm
3.3 kg
D.C. 7.2 V
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
) : 89 dB(A)
pA
) : 102 dB(A)
WA
Wear ear protection
ENE059-1
ENG905-1

Advertisement

Table of Contents
loading

Table of Contents