Moog Minimoog Model D User Manual page 30

SPECIFICATIONS
CONTROL VOLTAGE INPUTS
Loudness: 1/4" TRS
0 to +5 volts; +5 volts = Unity Gain
Ring connector allows pedal control via Moog EP-3 Expression Pedal
Filter (Cutoff Frequency): 1/4" TRS
1 volt per octave of change
Ring connector allows pedal control via Moog EP-3 Expression Pedal
Oscillators (Pitch): 1/4" TRS
1 volt per octave of change
Ring connector allows pedal control via Moog EP-3 Expression Pedal
Modulation Source: 1/4" TRS
Ring=Noise Send; Tip=Modulation Receive (This jack makes a normalled
connection with no cable present.)
Trigger: +5 volt V-Trigger; 1/4" TS
Activates both Contour Generators
MIDI JACKS (5-PIN DIN STYLE)
MIDI In Note On (Trigger), Note #
MIDI Out Note On (Trigger); Note #
Pitch CV; Velocity; Aftertouch
MIDI Thru Mirror of the MIDI In signal
POWER SUPPLY
Self-switching external supply; 100–240 volts;
50/60 Hz; <12 Watt nominal consumption.
Locking XLR-4 connector.
DIMENSIONS (WITH PANEL FULLY LOWERED)
Width: 28.625" / 727 mm
Depth: 17.125" / 435 mm
Height: 5.75" / 146 mm
Net Weight: 32 lbs. / 14.5 kg.
TEMPERATURE
Storage Temperature: 5F to 140F (2C to 60C)
Nominal Operating Temperature: 10 – 35 C (50 – 95 F)
Operational Temperature: 10 – 50 C (50 – 122 F)
Specifications Subject To Change Without Notice
(Continued)
29