Moog Minimoog Model D User Manual page 24

GATE SOURCE POWER-ON COMMANDS
Determines which sources will trigger the Keyboard Gate and Contour Generators.
EXTERNAL GATE
Hold F2 + A2 while turning on the power to select External Gate sources only
EXTERNAL AND LOCAL KEYS (NO MIDI)
Hold F2 + Bb2 while turning on the power to select External and Local Keys as Gate sources only.
EXTERNAL AND MIDI (NO LOCAL KEYS)
Hold F2 + B2 while turning on the power to select External and MIDI as Gate sources only.
EXTERNAL, MIDI AND LOCAL KEYS (ALL)
Hold F2 + C3 while turning on the power to select all Gate sources (Default).
VELOCITY CONTROL VOLTAGE RANGE POWER-ON COMMANDS
The voltage range of the Velocity control output can be doubled from five volts to ten volts in order
to accommodate different types of analog equipment.
VELOCITY CV RANGE = 5 VOLTS
Hold G0 + C#1 while turning on the power to limit the Velocity CV range to five volts.
VELOCITY CV RANGE = 10 VOLTS
Hold G0 + D1 while turning on the power to expand the Velocity CV range to ten volts.
KEYBOARD TUNING ERROR POWER-ON COMMAND
The Pratt-Read keyboard on the original Minimoog Model D used a fixed resistor network on each key
to set the pitch. This feature can recreate the tuning errors caused by variations in the resistor values
to add a more vintage sound and feel to the instrument. When On, a random error value (within 10
cents), to replicate the tolerance values of the original resistors will be applied to each key; the error
value remains constant each time the key is played.
KEYBOARD TUNING ERROR ON
Hold F1 + C2 while turning on the power to turn Keyboard Tuning Error On.
KEYBOARD TUNING ERROR OFF
Hold F1 + B1 while turning on the power to turn Keyboard Tuning Error Off.
MIDI POWER-ON COMMANDS
SETTING THE MIDI CHANNEL
Hold A#3 and press any of the lowest 16 lowest keys while turning on the power to set the MIDI Chan-
nel. The MIDI IN and MIDI OUT Channel are always the same.
MIDI IN TRANSPOSE
Hold C4 and press any key in the octave above or below C2 while turning on the power to transpose
the MIDI IN note data by +/- 12 semitones.
MIDI OUT TRANSPOSE
Hold B3 and press any key in the octave above or below C2 while turning on the power to transpose
the MIDI OUT note data by +/- 12 semitones.
MIDI PITCH WHEEL ON
Hold F0 + C1 while turning on the power to transmit Pitch Bend data via MIDI.
MIDI PITCH WHEEL OFF
Hold F0 + B0 while turning on the power to disable the transmission of Pitch Bend data via MIDI.
23