Setting The Hospital Option Data - Samsung HG32NC693 Installation Manual

Series 6, 693

Hide thumbs

Table Of Contents

Table of Contents

To let you control how the TV functions when in Hospital mode, the TV has two Hospital mode menus, the Stand-alone mode

menu and the Interactive mode menu. The menu items that differ between the modes are listed below.

Menu items in the Stand-alone mode only:

– SI Vendor : SSCP

– REACH Server and its submenus.

Menu items in the Interactive mode only:

– SI Vendor: Samsung and other vendors.

All other items appear in both modes.

To access the menus, press

After a menu appears, follow these general directions to navigate and change values:

– Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item.

– Press the Enter or Left or Right arrow buttons to select a menu item. The screen displays that menu item only.

– Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left

arrow button decreases numerical values.

– When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or

previous menu item.

– Press the

RETURN

– To exit a Hospital mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except

changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily,

then unplug the TV, wait for the Standby LED to go off, and then plug the TV in again.

Hospitality Mode

SI Vendor

Power On

Channel

Menu OSD

Clock

Music Mode

Remote Jack Pack

External Source

Pillow Speaker

Eco Solution

Logo/Message

Cloning

REACH Solution

Network

To change menus between the interactive mode and the standalone mode, follow the steps below :

1. Highlight the Hospitality Mode menu item in the top left corner of the menu.

2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed.

3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive

to Standalone.

4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the

Hospitality Mode field.

✎

After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 22.

English