Samsung HG32NC693 Installation Manual page 7

COMPONENT IN / AV IN 1
8
– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as VCRs.
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or
Component devices.
– The COMPONENT IN
– Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV and
the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and cables.
– If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
– When your are connecting a composite (AV) device to AV IN1 [Y/Video], connect the video cable (Yellow) to the
[Y/VIDEO] jack (Green/Yellow) .
PILLOW OUT : Connect the pillow speaker. Refer to page 9 for more information.
9
DATA
0
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
DVI AUDIO IN: Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable.
!
Some DVI devices may not or should not need this connection audio.
jack is also used as the VIDEO 1 jack.
AV IN1
7
English