Samsung HG32NC693 Installation Manual page 19

Menu Item
Self Diagnosis
for TV
Self Diagnosis
for HTV
System
SW Update
Service Pattern
ATV Cable
AGC Gain
DTV Open
Cable AGC
Gain
Contact to
Samsung
TV reset
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
initial Value
• Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem appears in the test
... picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If the problem
occurs during the test, select Yes and follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB.
If you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss
appears to have failed and the Pro:Idim encryption channel has failed to play content,
... first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting
system does not have a problem, contact Samsung Service. If STB SI Vendor Setting
appears to have failed and communication with the SI STB or SBB has failed, first check
your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung
Service.
... Lets you upgrade the TV SW with a USB memory stick. See Page 29.
Lets you check the state of the TV picture by displaying picture test patterns. Press the
OFF
Menu button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default
Default
value unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default
Default
value unless problems occur.
If this item is entered into, the information about this TV is displayed.
Returns all settings on the TV to their factory defaults.
Description
19
English