Interlogix advisorone Quick Operation Manual page 2

Figure 1: AdvisorOne Main screen
Note: The screen to
the left is an example.
Some systems are
configured differently.
Table 1: Main screen
Icon Description
Top bar
Access the emergency screen to select the appropriate icon (Fire, Police, or Auxiliary).
The current system time and date. To change the time and date see "To set the date and time:" on page 4.
Time & Date
An icon that provides quick access to system help, FAQ's, and dealer contact information.
At-A-Glance area (If not programmed the At-A-Glance icons will be grayed out and "N/A" will appear)
Door status - The icon depicted on the left indicates all monitored doors are closed. The icon depicted on the right indicates
one or more monitored doors are open. Press the icon to obtain more information.
Window status - The icon depicted on the left indicates all monitored windows are closed. The icon depicted on the right
indicates one or more windows are open. Press the icon to obtain more information.
Motions sensor status - The icon depicted on the left indicates no recent monitored motion is detected. The icon depicted on
the right indicates monitored motion was detected in the last 10 minutes.
Property status - Depicts status changes in monitored property protection in the building (i.e. water detection, glassbreak
detection, smoke detection, CO detection, etc). The icon depicted on the left indicates all monitored sensors are closed and no
activity has occurred since being checked. The icon depicted on the right indicates a monitored sensor is tripped or there is
unacknowledged activity.
Assets status - Depicts status changes in monitored assets in and around the building (i.e. movement of recreational vehicles,
lawn care equipment, artwork, electronics, etc). The icon depicted on the left indicates all monitored sensors are closed and no
activity. The icon depicted on the right indicates one or more monitored assets have unacknowledged activity. Press icon to
obtain more information.
Note: By obtaining more information this acknowledges the activity and resets the icon status to normal.
Bottom bar
Security Status - Press to access the System Status, Zone Status, and Events security status screens.
Settings and Configuration - Press to access the General settings, Display, Sound, Date & Time, Applications, and Configuration
screens.
Applications - Press to gain quick access to the applications in the system. Press to access the active and inactive applications in
the system. Contact the dealer for more information.
Disarm - Pressing this icon will begin the sequence of disarming the system.
Note: When disarmed, only 24-hour sensors (smoke, carbon monoxide detectors, etc) remain active.
Arm Stay - Arms perimeter doors and windows only. Interior devices, such as motions remain off so you can stay inside the
premises without setting off an alarm.
Arm Night - Arms doors, windows, and interior motions, while leaving designated interior protection inactive. Contact the dealer for
more information.
Arm Away - Arms perimeter door/window sensors and interior motion sensors for maximum protection.
2
Top Bar
At a Glance area
Bottom Bar
AdvisorOne Quick Operation Guide