Reversing The Door Stop - Whirlpool HSCR80420 Use & Care And Installation Manual

REVERSING THE DOOR STOP

If needed, the door stop of the dryer door can be
reversed . Use pliers and a cross-head screwdriver for
the procedure .
1.
Remove the two screws which are situated
over and under the door lock, left from the door
opening .
2.
Press the small knob above the door lock
with a small screwdriver . At the same time move
upwards the door lock and pull it towards you with
your finger .
For removing and fixing the door, the help of a
second person is recommended . Make sure that the
dryer is unplugged . Open the dryer door .
3.
Remove the two screws on the door hinge .
4.
Remove the door and carefully lay it upside
down on a blanket or similar .
EN
29