Installation Check List - Outback GTFX2012E Installation Manual

INSTALLATION CHECK LIST

ITEM
All manuals read and reviewed?
FX
OutBack Charge Controller
MATE
HUB
System mounted with the recommended number and sized fasteners?
System installed according to local codes?
System inspected?
System permanently grounded?
Did the installer use OutBack recommended wire type and gauge adjusted for
temperature ratings and length?
All AC wiring rated for 75 °C or higher?
Battery cables rated 75 °C or higher?
10.0 mm (8 AWG) wire or larger used for FX AC Hot In and AC Hot Out?
2
FX connected with correctly-sized branch-circuit overcurrent protection?
All cables torqued to OutBack specifications?
AC and PV breakers to 2.48 Nm/22 inch-lbs?
All DC connections to 13.55 Nm/10 foot-lbs?
FX AC terminals to 3.38 Nm/30 inch-lbs?
FX battery breaker to 5.08 Nm/45 inch-lbs?
All terminal block screws torqued to 3.38 Nm/2.5 foot-lbs?
YES NO
35