Replacing The Batteries - SAGEMCOM SIXTY 2 User Manual

4 Connect the other end of the cable with the power wall socket.
5 The indicator on the base lights during 5 seconds.
6 Connect the power supply unit to the charger.
7 Plug in the other end of the power supply unit to the mains.
8 Remove the tab.
9 The handset screen comes on. The message "SAGEMCOM" appears on the screen.
Note To ensure optimum charging, leave the handset on the base for at least
10 hours before using the phone for the first time.
Note If your handset battery is empty leave the handset in the charging unit for
at least 4 minutes.

Replacing the batteries

1 2
+
+
-
-
1 Remove the battery compartment cover.
2 Insert the new batteries one by one in compliance with the polarity of the batteries.
3 Replace the battery compartment cover.
4 Press the cover gently. The "Click" sound indicates that the cover is in the locked
position.
5 Place the handset on its charger.
3
-
-
+
+
- +
12
SIXTY 2
Discover...
4
Clack
5