SAGEMCOM SIXTY 2 User Manual page 53

SIXTY 2
Setting up...
Case 2 :
Menu > Settings
• Press Select.
• Select Advanced settings
• Select Set handset
• Select Registration
• The handset displays : "Put the base in registration & press OK".
• Place your base in pairing mode (see previous paragraph).
• On the handset, press OK.
• The message "Search" is displayed.
• Once the base is detected, its name is displayed on the handset screen.
• Press Yes to confirm.
• The message "Registration in progress" is displayed.
• The message "Registered" is displayed.
You then automatically exit the pairing mode.
Note The standard pairing of a new handset is automatic if the default
pin number (0000) has not been changed. Otherwise a message
Enter code prompts you to enter the new PIN number.
If an error occurs, the message Registration failed is displayed
prompting you to repeat the whole procedure.
using the or
using the or keys and press Select.
then press Select.
52
keys and press Select.