Base Version; Activating Emission Free Mode - SAGEMCOM SIXTY 2 User Manual

SIXTY 2
Setting up...

Base version

Menu > Settings
• Press Select.
• Select Advanced settings
• Select Set base
• Select Base version
• The following information is displayed :
- base software version,
- EEPROM version,
- base hardware version.

Activating emission free mode

There is a Emission free mode on your handset. It controls the radio transmission
power needed according to how far away your base is.
If emission free mode is activated it means that neither base nor handset do emit
any signal until it is resumed by any action from the line or handset.
Menu > Settings
• Press Select.
• Select Advanced settings
• Select Set base
• Select Emission free mode
• Set the status (activated or deactivated) with the On/Off key.
• Select Save changes ? using the
The action is confirmed by the "OK" indication.
using the
using the or keys and press Select.
using the or
using the
using the or keys and press Select.
using the
or keys and press Select.
keys and press Select.
or keys and press Select.
or keys and press Select.
or keys and press Store.
57