Aligning The Projected Image To The Screen (Quick Corner) - Epson EMP-1815 User Manual

Correcting Distortion in the Projected Image
• Quick Setup can provide effective correction when the
q
borders of the projection surface stand out clearly, such as
a white screen with black borders. When protecting
images on a blackboard, for example, you should stick a
large-sized sheet of white paper on the blackboard.
• Quick Setup can be used to carry out correction within the
ranges given below. If the distortion is outside these
ranges, correction will not be carried out correctly.
Furthermore, if the image is distorted both vertically and
horizontally or if the zoom has been adjusted to "W", the
correction range will become narrower than the angles
given below.
- When correcting to within a border
Vertically: Approx. 45°Horizontally: Approx. 20°
- When projecting onto a surface without a border
Vertically: Approx. 45°Horizontally: Approx. 15°
Aligning the Projected Image to the Screen (Quick
Corner)
This function independently corrects each of the four corners of the
projected image to align the image with the screen.
Procedure
To operate this function on the projector's control panel, set "Setting
menu" - "Keystone" in the configuration menu to "QuickCorner".
Downloaded from ProjectorsManual.com Manuals
A
Press one of [w], [v], [<] and [>] on the projector.
The Quick Corner screen for selecting the four corners is
displayed.
B
Select the corner to be corrected, and press the
[Enter] button on the projector or remote control.
18