Settings Menu - Epson EMP-1815 User Manual

List of Functions

Settings Menu

For EMP-1815
Sub Menu
Keystone You can correct keystone distortion in images.
H/V Keystone : Corrects horizontal and vertical keystone distortion. Select one of "V-Keystone", "H-Keystone" and "Auto V-Keystone". If "Auto
V-Keystone" is selected and set to "On", vertical tilt of the projector is detected and automatically corrected. When set to "Off", correct manually
by the [w], [v], [<] and [>] buttons on the control panel.
"V-Keystone" and "H-Keystone" are for performing correction manually.
Quick Corner : Selects and corrects the four corners of the projected image. s
Operation Lock You can use this to restrict operation of the projector's control panel. s
Pointer Shape
You can select the shape of the pointer. s
Pointer 1:
Brightness Control You can set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is
selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is
reduced. Electrical consumption: about a 40 W decrease, lamp life: about 1.5 times longer
Volume You can adjust the volume.
Remote Receiver
You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to
deactivate the remote receiver you do not want used or that is experiencing interference.
Test Pattern When the projector is setup, a test pattern is displayed so that you can adjust the projection without connecting other equipment. While the test
pattern is displayed, zoom and focus adjustments, and keystone correction, excluding Quick Setup, can be performed.
To cancel the test pattern, press the [Esc] button on the remote control or the control panel.
Reset You can reset all adjustment values for the "Settings" menu to their default settings.
To return all menu items to their default settings, see s
Downloaded from ProjectorsManual.com Manuals
p.26
Pointer 2: Pointer 3:
For EMP-1810
Function
p.18
p.37
p.58
43