Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Ensure all ground wires are connected before certifying unit as
repaired and/or operational.
Light Assembly
The unit uses 40 watt bulbs to light the unit.
The bulbs are located at the top of unit.
To access bulbs, remove light cover and bulb
is accessible.
To check bulb, verify filament is not broken,
resistance in the bulb, and voltage is
supplied to the socket.
Fresh Food Fan Assembly
The unit uses a fan to circulate air through
the refrigerator compartment.
1. To access, remove shelves, remove
covers in upper left and right rear
corners.
Corner covers
20
!
Bulbs
WARNING
2. Remove screws securing cover.
3. Disconnect wiring and fan is accessible.
Fresh FoodFan
4. Reverse procedure to reinstall.
©2012 Viking Preferred Service