Invacare TDX SP2 Series User Manual page 102

Invacare® TDX SP2® Series
Axle loads
Max. front axle load
Max. rear axle load
Max. centre axle load
1 IPX4 classification means that the electrical system is protected against spray water.
2 Static stability downhill, uphill, and sideways according to ISO 7176-1 = 9° (15.8 %)
Dynamic stability uphill according to ISO 7176-2 = 6° (10.5 %)
3 Note: The drive range of a mobility device is strongly influenced by external factors, such as the speed setting of the wheelchair,
the charging state of the batteries, surrounding temperature, local topography, road surface characteristics, tire pressure, weight of
user, drive style and use of batteries for lighting, servos etc.
The specified values are theoretical maximum achievable values measured according to ISO 7176-4.
4 Measured with solid tires. Pneumatic tires can increase the max. total width.
5 Measured without seat cushion
6 Width adjustable for side panel adjustment
7 Distance between backrest reference plane and most forward part of armrest assembly
8 Horizontal distance of wheel axle from intersection of loaded seat and backrest reference planes
9 The actual curb weight depends on the fittings your mobility device has been supplied with. Every Invacare mobility device is weighed
when leaving the works. Refer to the nameplate for the curb weight (including batteries) measured.
10 If two values are possible the lowest always applies.
102
•
106 kg
•
97 kg
•
217 kg
1578997-C