Video Input Connections; Data Input / Output Connections - AFi MT-984C-SL Instruction Manual

Eight channel digital transmitter with rs485, rs-422, rs232 or manchester data

VIDEO INPUT CONNECTIONS

The video input connections are made via BNC connectors on the unit. The video input should be

connected to an appropriate 75 baseband video source such as a camera or a video recorder output.

For optimum performance the video cables should be the shortest length of coax practical.

Data input and output connections are made via a terminal block on the unit. Follow the drawings below

for proper orientation of input and output connections. Please note that the far left pin on each

connection drawing corresponds with the far left pin on the terminal block. For example RS485 DATA

IN + is pin 5 as shown above and on the label.

Table of Contents